Porter Cable PXCMPC1682066 Air Compressor Manual

The Porter Cable PXCMPC1682066 is a 6-gallon pancake air compressor designed for a variety of tasks, including inflation, nailing, and stapling. It features a powerful 0.8 HP motor, a maximum pressure of 150 PSI, and a quick recovery time. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, quick recovery time, and lightweight design for portability.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Allows for a wide range of applications
Oil-Free Pump	Requires less maintenance and provides clean air
Quick Recovery Time	Reduces downtime between tasks
Lightweight Design	Easy to transport and store

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a power outlet: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and listen for any air leaks.

WARNING! Always ensure the compressor is off and unplugged before making any connections.

First-Time Setup

Power on the compressor; follow the setup instructions provided.

Set the pressure: Adjust the regulator to the desired PSI for your application.
Test the compressor: Run it briefly to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before operating the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor Power: 0.8 HP.
Weight: 30 lbs.
Dimensions: 17.5 x 17.5 x 18.5 inches.
Noise Level: 68 dBA.
Power Source: 120V AC.

Controls and Settings

Access controls on the front panel: Pressure regulator, on/off switch, and quick coupler for air hose connection.

Pressure Regulator: Adjusts the output pressure for different applications.

Connecting Devices

Connect air tools using the quick coupler on the compressor.

Ensure the compressor is off before connecting tools.
Match the tool's connector to the quick coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure to the required level for your tool.
Monitor the compressor during operation for any unusual sounds.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank: Release moisture after each use.
Check the air filter: Clean or replace as necessary.
Inspect hoses and connections: Look for wear or damage.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor in a dry area to prevent electrical hazards.
Do not operate the compressor in enclosed spaces without ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and connections.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact Porter Cable customer service.