Porter Cable PXCMLC3706056 Air Compressor Manual

The Porter Cable PXCMLC3706056 is a 6-gallon portable air compressor designed for a variety of tasks including inflation, nailing, and stapling. It features a low-maintenance oil-free pump, a maximum pressure of 150 PSI, and a quick recovery time. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, quick recovery time, and easy-to-read pressure gauge.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
150 PSI Maximum Pressure	Allows for a variety of applications.
Quick Recovery Time	Reduces downtime between tasks.
Portable Design	Easy to transport and store.
Pressure Gauge	Easy monitoring of air pressure.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into AC power: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Always operate in a well-ventilated area to avoid inhalation of fumes.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.
Check all connections: Ensure everything is secure before use.

CAUTION! Ensure the compressor is on a flat surface to prevent tipping.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 30 lbs.
Dimensions: 18 x 18 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

Access controls via the front panel: pressure gauge, on/off switch, and pressure regulator.

Pressure Regulator: Adjusts the output pressure for different applications.

Always monitor the pressure gauge during operation to avoid over-pressurization.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the desired tool.
Check for secure connections to prevent air leaks.
Turn on the compressor and adjust the pressure as needed.

Tip: Always use the appropriate fittings for your tools.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired level.
Connect your tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Inspect the air filter regularly and replace if necessary.
Check for any loose connections or leaks.

CAUTION! Always unplug the compressor before performing maintenance.

Regulatory Information

This compressor complies with all applicable safety standards. For support, visit www.portercable.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in the system	Inspect for leaks and tighten connections.
Noisy operation	Loose components	Tighten any loose screws or fittings.
Overheating	Blocked air intake	Ensure the air intake is clear of obstructions.

Service: For further assistance, contact customer service at 1-800-123-4567.