Porter Cable Pancake Compressor C2002 Manual

The Porter Cable Pancake Compressor C2002 is a compact and portable air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a 2.6 SCFM at 90 PSI for quick recovery time. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Allows for efficient operation of pneumatic tools
Oil-Free Pump	Requires less maintenance and provides clean air
Lightweight Design	Easy to transport and store
Easy-to-Read Gauges	Monitor pressure levels easily

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Always operate in a well-ventilated area to avoid inhaling fumes.

First-Time Setup

Power on the compressor; allow it to build pressure before using.

Set the desired pressure using the regulator.
Check for any air leaks in the connections.
Test the compressor with a pneumatic tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
SCFM at 90 PSI: 2.6 SCFM.
Weight: Approximately 30 lbs.
Power Source: 120V AC.
Pump Type: Oil-free.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure regulator and gauges located on the front panel. The on/off switch is also easily accessible.

Gauges: Monitor tank pressure and regulated pressure for tools.

Adjust the regulator to set the desired output pressure for your tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose securely to the compressor outlet.
Connect the other end to your pneumatic tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate, simply turn on the compressor and allow it to build pressure. Use the regulated pressure for your tools.

Monitor the gauges during operation.
Adjust the regulator as needed for different tools.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and clean the air filter regularly.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in hose or connections	Inspect and tighten connections.
Excessive noise	Loose parts	Tighten any loose screws or components.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact customer support.