Porter Cable N028591 Air Compressor Manual

The Porter Cable N028591 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a powerful motor, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
150 PSI Maximum Pressure	Delivers high pressure for efficient tool operation
Oil-Free Pump	Requires less maintenance and is easier to use
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of air pressure
Portable Design	Equipped with wheels for easy transport

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Ensure the compressor is on a flat, stable surface.
Connect the air hose to the compressor outlet.
Plug the compressor into a grounded outlet.
Check for any leaks before use.

WARNING! Always ensure the compressor is off and unplugged before making any connections.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure using the regulator knob.
Connect your air tool to the hose.
Turn on the compressor and allow it to build pressure.
Check for proper operation before use.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP.
Weight: 30 lbs.
Power Source: 120V AC.
Noise Level: 68 dBA.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure settings via the regulator knob. The on/off switch is located on the front panel.

Pressure Regulator: Adjusts the output pressure for your tools.

On/Off Switch: Turns the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect fittings.

Ensure the compressor is off before connecting tools.
Match the fittings to the air hose.
Turn on the compressor to begin using the tools.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor and allow it to build pressure.
Use the air tool as needed, monitoring the pressure gauge.
Turn off the compressor when finished.
Release any remaining pressure before storing.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Check and clean the air filter regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor in a dry area.
Do not operate in enclosed spaces without ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
No pressure	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Loose parts	Tighten all screws and fittings.
Pressure drops	Faulty regulator	Replace the regulator if necessary.

Service: For support, contact Porter Cable customer service.