Porter Cable CPFC2TV3520W Air Compressor Manual

The Porter Cable CPFC2TV3520W is a versatile air compressor designed for both home and professional use. It features a 3.5-gallon tank, a powerful 120V motor, and a maximum pressure of 135 PSI, making it suitable for a variety of tasks including inflating tires, powering pneumatic tools, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 3.5-gallon tank, 120V motor, pressure gauge, quick coupler, and safety valve.

Feature	Description
3.5-gallon tank	Provides ample air storage for various tasks
120V motor	Powerful motor for efficient operation
Maximum pressure of 135 PSI	Suitable for a wide range of applications
Pressure gauge	Allows for easy monitoring of air pressure
Quick coupler	Facilitates easy connection of air tools
Safety valve	Prevents over-pressurization

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a grounded outlet: Use a suitable extension cord if necessary.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Ensure the compressor is placed in a well-ventilated area.

First-Time Setup

Power on the compressor; follow the instructions for initial setup.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 3.5 gallons.
Motor Voltage: 120V.
Maximum Pressure: 135 PSI.
Weight: Approximately 50 lbs.
Dimensions: 20 x 18 x 18 inches.
Air Delivery: 2.6 SCFM at 90 PSI.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick coupler.

Ensure the compressor is off before connecting tools.
Match the tool's connector to the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired setting.
Connect your air tool and begin operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is crucial for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles.
Keep the compressor away from flammable materials.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
No pressure	Leak in the system	Inspect hoses and connections.
Excessive noise	Loose parts	Tighten all screws and bolts.
Pressure not building	Faulty pressure switch	Replace the pressure switch.

Service: For assistance, contact Porter Cable customer service.