Porter Cable CFFR350C Air Compressor Manual

The Porter Cable CFFR350C is a compact and portable air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. It features a 3.5-gallon tank, a maximum pressure of 135 PSI, and a 2.0 SCFM at 90 PSI for quick recovery. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 3.5-gallon tank, 135 PSI maximum pressure, 2.0 SCFM at 90 PSI, oil-free pump, and easy-to-read pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
Portable design	Lightweight and easy to transport.
Pressure gauge	Allows for easy monitoring of air pressure.
Quick recovery	Fast refill time for continuous use.
Safety valve	Prevents over-pressurization.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Ensure the area is well-ventilated.
Connect the air hose to the compressor outlet.
Plug the compressor into a grounded outlet.
Check all connections for leaks.

WARNING! Always operate in a dry environment to avoid electrical hazards.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure using the regulator.
Turn on the compressor and allow it to build pressure.
Check for any air leaks before use.
Adjust the pressure as needed for your application.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 3.5 gallons.
Maximum Pressure: 135 PSI.
Air Delivery: 2.0 SCFM at 90 PSI.
Weight: 30 lbs.
Power Source: 120V AC.
Noise Level: 68 dBA.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Ensure the pressure gauge is visible for monitoring.

Tip: Always check the pressure gauge before using any pneumatic tools.

Connecting Devices

Connect your pneumatic tools using the air hose attached to the compressor outlet.

Turn off the compressor before connecting tools.
Ensure the air hose is securely attached.
Turn on the compressor and adjust the pressure as needed.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

To operate the compressor, turn on the power switch and allow it to build pressure. Monitor the pressure gauge during use.

Adjust the regulator to set the desired pressure.
Connect your tool and begin operation.
Monitor the tank pressure and refill as necessary.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear safety goggles and ear protection when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
No pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Pressure drops quickly	Faulty regulator	Replace the regulator if necessary.

Service: For assistance, contact Porter Cable customer service.