Porter Cable CFFC350C Air Compressor Manual

The Porter Cable CFFC350C is a compact and powerful air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. With a 3.5-gallon tank and a maximum pressure of 135 PSI, this compressor is perfect for both home and professional use. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 3.5-gallon tank, 135 PSI maximum pressure, oil-free pump, lightweight design, easy-to-read pressure gauge.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
3.5-Gallon Tank	Provides ample air storage for various tasks.
135 PSI Maximum Pressure	Suitable for a wide range of applications.
Lightweight Design	Easy to transport and store.
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of air pressure.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a power outlet: Use a grounded outlet for safety.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Always ensure the compressor is off before making any connections.

First-Time Setup

Power on the compressor; allow it to build pressure before use.

Set the desired pressure: Adjust the regulator to the required PSI.
Connect your tool: Ensure the tool is compatible with the compressor.
Test operation: Run the compressor to ensure proper functionality.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 3.5 gallons.
Maximum Pressure: 135 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 18 x 18 x 18 inches.
Noise Level: 68 dB.
Air Delivery: 2.0 SCFM at 90 PSI.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Ensure the pressure gauge is visible for monitoring.

Safety Features: Automatic shut-off when maximum pressure is reached, thermal overload protection.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Match the air hose to the tool's inlet.
Turn on the compressor and allow it to build pressure.
Adjust the regulator to the desired pressure for the tool.

Tip: Always check for leaks after connecting.

Operating the Compressor

To operate, turn on the compressor and allow it to reach the set pressure. Use the air for your tools as needed.

Monitor the pressure gauge during operation.
Turn off the compressor when finished.
Release any remaining pressure before storage.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance ensures optimal performance. Follow these steps:

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear.

WARNING! Keep the compressor away from flammable materials and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For further assistance, contact customer support.