Porter Cable C2002 Air Compressor Manual

The Porter Cable C2002 is a 6-gallon oil-free pancake air compressor designed for a variety of tasks including inflation, nailing, and stapling. It features a low amp 120V motor that starts easily in cold weather, a durable design, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, 150 PSI maximum pressure, quick recovery time, and lightweight design for portability.

Feature	Description
Oil-free pump	Requires no maintenance and reduces the risk of oil contamination.
150 PSI maximum pressure	Provides sufficient pressure for various applications.
Low amp motor	Starts easily in cold weather and reduces the risk of tripping circuit breakers.
Quick recovery time	Reduces downtime between tasks.
Lightweight design	Easy to transport and store.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose: Ensure the compressor is off, then attach the hose securely.
Plug into a grounded outlet: Use a 120V outlet to power the compressor.
Check for leaks: Turn on the compressor and check all connections for air leaks.

WARNING! Always ensure the compressor is off before making any connections.

First-Time Setup

Power on the compressor and allow it to build pressure.

Set the pressure regulator: Adjust to the desired pressure for your application.
Test the compressor: Use a tool to ensure it operates correctly.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 120V, 2.0 running horsepower.
Weight: Approximately 30 lbs.
Dimensions: 17.5 x 17.5 x 18 inches.
Noise Level: 68 dBA for quieter operation.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Ensure the pressure gauge is visible for monitoring.

Safety Features: Includes a safety valve and thermal overload protection.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Attach the air hose to the compressor and the tool.
Check for secure connections before turning on the compressor.

Tip: Use quick-connect fittings for easier tool changes.

Operating the Compressor

Turn on the compressor and allow it to build pressure before using any connected tools.

Monitor the pressure gauge during operation.
Turn off the compressor when finished and disconnect tools.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose components	Tighten any loose screws or fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact Porter Cable customer service.