Porter Cable C2001 Air Compressor Manual

The Porter Cable C2001 is a 6-gallon oil-free pancake air compressor designed for portability and ease of use. It features a powerful 0.8 HP motor that delivers 2.6 SCFM at 90 PSI, allowing for quick recovery time and efficient operation. The compressor is equipped with a low amp 120V motor, a quick recovery time, and a durable design suitable for various applications including inflation, nailing, and stapling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, quick-connect air outlet, pressure gauge, and regulator.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance of portability and air storage.
Quick-connect outlet	Allows for easy attachment of air tools.
Pressure gauge	Displays current tank pressure for monitoring.
Regulator	Controls the output pressure to the air tools.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect outlet.
Ensure the pressure regulator is set to the desired PSI.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Always operate in a dry environment to avoid electrical hazards.

First-Time Setup

Before using the compressor, ensure all connections are secure and the tank is empty.

Check the oil level if applicable (oil-free models do not require this).
Set the desired pressure using the regulator.
Test the compressor with a small air tool to ensure functionality.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Motor: 0.8 HP, 120V.
Air Delivery: 2.6 SCFM at 90 PSI.
Maximum Pressure: 150 PSI.
Weight: Approximately 30 lbs.
Dimensions: 17.5 x 17.5 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

The compressor features a pressure switch, regulator, and gauges for monitoring tank and output pressure.

Operation: Use the pressure regulator to adjust the output pressure for different tools.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick-connect outlet.
Connect the air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor and allow it to build pressure.
Use the regulator to set the desired output pressure.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check for leaks and tighten connections as needed.
Store in a dry place to avoid rust and damage.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear safety goggles when using air tools.
Keep hands and body away from moving parts.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in hose or connections	Inspect for leaks and tighten connections.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact Porter Cable customer service.