Porter Cable Air Compressor C2002 Type 9 Manual

The Porter Cable Air Compressor C2002 Type 9 is a portable air compressor designed for various applications including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a low amp motor for easy start-up. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, low amp motor, quick recovery time, and easy portability.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks.
150 PSI Maximum Pressure	Allows for a wide range of applications.
Low Amp Motor	Ensures easy start-up and reduces the risk of tripping breakers.
Portability	Lightweight design with a handle for easy transport.
Quick Recovery Time	Reduces downtime between tasks.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from flammable materials.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.

WARNING! Always ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Check oil level if applicable; add oil if necessary.
Set the pressure regulator to the desired PSI.
Test the compressor by running it briefly.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP, low amp.
Weight: Approximately 30 lbs.
Dimensions: 24 x 18 x 18 inches.
Power Source: 120V AC, 60Hz.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Automatic shut-off at maximum pressure, thermal overload protection.

Connecting Devices

Use the appropriate air hose and fittings for your tools.

Turn off the compressor before connecting devices.
Ensure all connections are secure to prevent leaks.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before using connected tools.

Operating the Compressor

Follow the manufacturer's instructions for operating various tools with the compressor.

Turn on the compressor and allow it to reach the desired pressure.
Connect your tool and adjust the pressure as needed.
Monitor the compressor during operation for any unusual sounds.

WARNING! Do not exceed the recommended pressure for your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Overheating	Blocked air intake	Clean air intake filter.
Unusual noise	Loose parts	Tighten all screws and fittings.

Reset: If applicable, follow the manufacturer's reset procedure.

Service: Contact customer support for further assistance.