Porter Cable Air Compressor 60 Gallon 155 PSI Manual

The Porter Cable Air Compressor is a robust 60-gallon unit designed for heavy-duty applications. With a maximum pressure of 155 PSI, it provides ample power for a variety of pneumatic tools. This manual covers essential safety information, features, installation, operation, and troubleshooting tips to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Tools 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

This air compressor features a powerful motor, large tank capacity, and multiple outlets for various tools.

Feature	Description
60 Gallon Tank	Provides extended run time for air tools
155 PSI Maximum Pressure	Suitable for heavy-duty applications
Oil-Lubricated Pump	Ensures durability and longevity
Multiple Outlets	Allows for simultaneous use of multiple tools
Portable Design	Wheels for easy transportation

Installation

Ensure the compressor is placed on a flat, stable surface. Follow these steps for installation:

Unpack the compressor and inspect for any damage.
Connect the air hose to the outlet.
Plug the compressor into a grounded outlet.
Fill the oil reservoir if required.

WARNING! Always ensure the compressor is turned off before making connections.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Check oil levels and fill if necessary.
Set the pressure regulator to the desired PSI.
Test the compressor by turning it on and checking for leaks.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Capacity: 60 gallons.
Maximum Pressure: 155 PSI.
Motor Power: 5.0 HP.
Weight: 200 lbs.
Dimensions: 48 x 24 x 36 inches.
Noise Level: 75 dB.
Power Source: 240V AC.

Controls and Settings

The compressor features an easy-to-use control panel with pressure gauges and on/off switches.

Pressure Regulator: Adjusts the output pressure for tools.

On/Off Switch: Powers the compressor on and off.

Connecting Tools

To connect tools, follow these steps:

Ensure the compressor is off.
Connect the air hose to the desired outlet.
Attach the tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before using any tools.

Operating the Compressor

To operate the compressor:

Turn on the compressor using the power switch.
Adjust the pressure regulator to the desired level.
Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance:

Check and change the oil as needed.
Drain the tank regularly to remove moisture.
Inspect hoses and connections for wear.

Safety Information

Always follow safety guidelines when operating the compressor:

Wear appropriate safety gear.
Keep the area clear of hazards.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power connection and circuit breaker.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Oil leaks	Worn seals	Replace seals and gaskets.

Service: For further assistance, contact customer support.