Porter Cable Air Compressor 135 PSI Manual

The Porter Cable Air Compressor is a reliable and efficient tool designed for various applications, including inflating tires, powering pneumatic tools, and more. With a maximum pressure of 135 PSI, it provides ample power for your needs. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Operation 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key components: 135 PSI maximum pressure, 6-gallon tank, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
135 PSI Maximum Pressure	Provides sufficient power for various applications.
6-Gallon Tank	Offers a good balance between portability and air supply.
Oil-Free Pump	Requires less maintenance and is easier to use.
Lightweight Design	Easy to transport and maneuver.
Pressure Gauge	Allows for easy monitoring of air pressure.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from flammable materials.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Always operate in a well-ventilated area and avoid using near flammable substances.

Operation

To use the air compressor, follow these steps:

Set the desired pressure using the regulator.
Connect your pneumatic tool or accessory to the air hose.
Turn on the compressor and monitor the pressure gauge.
Use the tool as needed, and the compressor will automatically refill as required.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Maximum Pressure: 135 PSI.
Tank Capacity: 6 gallons.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Pump Type: Oil-free.
Noise Level: 68 dBA.
Dimensions: 24 x 18 x 18 inches.

Maintenance

Regular maintenance is essential for optimal performance:

Check and tighten all connections regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect the air filter and clean or replace as necessary.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Low pressure	Leak in hose or connections	Inspect and replace damaged parts.
Excessive noise	Loose parts	Tighten all screws and connections.
Compressor cycles frequently	Tank not holding pressure	Check for leaks and repair as needed.

Service: For further assistance, contact customer support.