Porter-Cable 135 PSI Air Compressor 6 Gallon Manual

The Porter-Cable 135 PSI Air Compressor is a powerful and portable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. With a 6-gallon tank, it provides ample air supply for your needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 135 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides a sufficient air supply for various tasks.
135 PSI Maximum Pressure	Delivers high pressure for efficient tool operation.
Oil-Free Pump	Requires less maintenance and provides clean air.
Lightweight Design	Easy to transport and maneuver.
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of air pressure.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into AC power: Use a grounded outlet to avoid electrical hazards.
Check for leaks: Apply soapy water to connections and look for bubbles.

WARNING! Ensure the compressor is off before making connections. Always use safety gear when operating.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Adjust the regulator to the required PSI for your task.
Test the compressor: Allow it to fill and check for proper operation.

CAUTION! Ensure the area is well-ventilated during operation.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 135 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Pump Type: Oil-free.
Noise Level: 68 dBA.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access controls on the front panel: power switch, pressure regulator, and pressure gauge.

Regulator: Adjusts output pressure for different tools.

Pressure Gauge: Displays current tank pressure.

Connecting Devices

Connect air tools using the appropriate fittings.

Ensure the compressor is off before connecting tools.
Match fittings to the tool's air inlet.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the power switch.
Allow the tank to fill to the desired pressure.
Connect your air tool and adjust the pressure as needed.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear safety goggles and hearing protection.
Keep the compressor in a dry, well-ventilated area.
Do not operate in flammable environments.

Regulatory Information

This compressor complies with all applicable safety standards. For support, visit www.portercable.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Reset: Unplug and plug back in to reset the compressor.

Service: For service inquiries, contact Porter-Cable customer support.